T&S Brass B-0044-H 44" Pre-rinse Stainless Steel Hose
The T&S Brass B-0044-H Pre-rinse Stainless Steel Hose is a 44-inch flexible hose designed for pre-rinse applications requiring durable stainless steel construction and a heat resistant handle. It features 3/4-14 UN female connections at both the inlet and outlet, providing compatibility with the specified connection configuration. The hose uses a stainless steel outer construction with polished chrome plated brass end fittings, a thermoplastic gray handle, and polyurethane inner tubing. Hose washers are included to support installation.
Designed for commercial pre-rinse equipment, this flexible stainless steel hose accommodates water temperatures from 40 F (4.44 C) to 140 F (60 C) and operating pressures from 20 psi (1.38 bar) to 125 psi (8.62 bar). The B-0044-H supports a spray valve flow rate of 6.25 GPM (23.66 L/min), providing the specified flow performance for pre-rinse applications. Its heat resistant gray handle provides a practical gripping surface, while the flexible hose construction allows convenient positioning during use. The hose is certified to ASME A112.18.1 / CSA B125.1 and NSF/ANSI 372 for lead content, and meets NSF/ANSI/CAN 61 Q≤1 requirements.
Key Features
- 44-inch flexible stainless steel hose
- 3/4-14 UN female inlet
- 3/4-14 UN female outlet
- Heat resistant gray thermoplastic handle
- Polished chrome plated brass end fittings
- Polyurethane inner tubing
- Hose washers included
- Spray valve flow: 6.25 GPM (23.66 L/min)
- Maximum pressure: 125 psi (8.62 bar)
- Minimum pressure: 20 psi (1.38 bar)
- Temperature range: 40 F to 140 F (4.44 C to 60 C)
- Certified to ASME A112.18.1 / CSA B125.1
- NSF/ANSI 372 and NSF/ANSI/CAN 61 Q≤1
California residents click here for Prop 65 warning
