Everest Refrigeration ESF1 29-1/4" Reach-in Freezer 1 Solid Door, 115v, 23-Cubic Feet, NSF
Everest Refrigeration ESF1 29-1/4" Reach-in Freezer 1 Solid Door, 115v, 23-Cubic Feet, NSF
The Everest Refrigeration ESF1 ES Series Upright Top Mounted Reach-In Freezer offers 23 cubic feet of capacity. The line is geared for sustainability and energy efficiency with features designed to reduce compressor run time and the reliance of electricity. Equipped with the Blizzard R290 system, a fully self-contained and detachable condensing unit which uses natural, environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
Main Features Include:
- Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
- Galvanized steel top, bottom and rear.
- 2.5" thick high density polyurethane insulation.
- Four 5" swivel casters with locks on front set and two front leg stabilizers.
- Three epoxy coated, steel wire shelves per section.
- Multi-function digital controller with easy to read LED display.
- Frame heaters prevent exterior moisture build up.
- Self-closing with adjustable torsion system for a positive seal.
- Snap-in magnetic door gasket make cleaning and replacement an easy process.
- High strength, recessed door handles.
- Pre-installed door locks keep your items safe from theft.
- Field reversible.
- Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
- R290 models include audible overheat protection alarm for compressor and condenser coil.
- LIGHTING: The Everest ESF1 Reach-in Freezer features energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
- CABINET CONSTRUCTION: Constructed of heavy duty stainless steel interior and exterior with rounded corners for a hazard-free workspace. Featuring a galvanized steel top, bottom and rear, 2.5" thick high density polyurethane insulation.
- TEMPERATURE CONTROL: Multi-function digital controller with easy to read LED display. Comes with a factory preset temperature of -4°F. With an adjustable temperature setting range from -10°F to 54°F.
- SHELVING: This unit is equipped with three epoxy coated, steel wire shelves per (1) section. The height of the shelves can easily be adjusted with the included stainless steel clips.
- DOORS: The door of this unit is constructed of strong heavy duty stainless steel on both the interior and the exterior, offering 2.5" thick high density polyurethane insulation. Door is are self-closing with adjustable torsion system for a positive seal and Field reversible.
California residents please click here for Prop 65 warning