Cleveland TMKEL80T Electric Steam Mixer Kettle, Tilting
The Cleveland TMKEL80T Electric Steam Mixer Kettle, Tilting is an 80-gallon commercial mixer kettle designed for controlled cooking, heating, and mixing in foodservice operations. Its permanently filled 50 psi steam jacket provides the jacketed heating system, while solid-state temperature control maintains regulation within ±1°F and includes a low-water safety control. A 3 HP hydraulic-powered system operates the scraper, agitator, and bridge lift. Operators can adjust scraper speed from 0 to 40 rpm and vary the scraper-to-agitator ratio from 1:1 to 8:1 for flexible mixing performance across different preparation requirements.
The Cleveland TMKEL80T features stainless steel construction, including the kettle, exterior surfaces, enclosed service components, and 10-gauge stainless steel hydraulically operated mixer bridge. Bayonet-mounted agitator and scraper components are removable without tools, and removable nylon blades scrape the jacketed surface. Safety devices prevent high-speed starts and stop mixing when the bridge is lifted. The tilting mechanism incorporates roller bearings and a case-hardened self-locking worm and segment gear. Additional equipment includes a large pouring lip, gallon markings, 2-inch tangent draw-off valve, hot and cold water faucet, rear-mounted pressure/vacuum gauge, pressure relief valve, and level-adjustable flanged feet. Standard electrical service is 208-240 volts, 60 Hz, three phase, four wire.
Key Features
- 80-gallon electric steam mixer kettle with tilting design
- 50 psi permanently filled steam jacket with safety valve
- 3 HP hydraulic-powered scraper, agitator, and bridge lift
- Infinitely variable scraper speed from 0 to 40 rpm
- Variable scraper-to-agitator ratio from 1:1 to 8:1
- Removable nylon blades scrape the jacketed surface
- Bayonet-mounted agitator and scraper for tool-free removal
- Solid-state temperature control with ±1°F regulation
- Low-water safety control
- 10-gauge stainless steel hydraulically operated mixer bridge
- Stainless steel kettle and exterior surfaces
- Safety devices prevent high-speed starts and stop mixing when the bridge is lifted
- Roller-bearing tilt mechanism with self-locking worm and segment gear
- 2-inch tangent draw-off valve and large pouring lip
- Hot and cold water faucet
- Rear-mounted pressure/vacuum gauge and pressure relief valve
- Level-adjustable feet flanged for bolting
- Standard electrical service: 208-240 volts, 60 Hz, three phase, four wire
California residents click here for Prop 65 warning
