Cleveland TMKEL40T Electric Steam Mixer Kettle, Tilting
The Cleveland TMKEL40T Electric Steam Mixer Kettle is a commercial tilting steam-jacketed mixer kettle designed for controlled cooking, heating, and mixing in high-volume foodservice operations. This 40-gallon kettle features a permanently filled 50 psi steam jacket and solid-state temperature control with ±1°F regulation for precise cooking conditions. Its 3 HP hydraulic-powered agitator, scraper, and bridge lift provide controlled mixing performance, while the infinitely variable scraper speed can be adjusted from 0 to 40 rpm. The scraper-to-agitator ratio is also infinitely variable from 1:1 to 8:1, allowing operators to adjust mixing action for different preparation requirements.
Built for demanding commercial kitchens, the Cleveland TMKEL40T combines stainless steel construction with enclosed plumbing, electrical, and hydraulic components. The 10-gauge stainless steel hydraulically operated mixer bridge and bayonet-mounted agitator and scraper support convenient operation and removal without tools. Removable nylon scraper blades are designed to scrape the jacketed surface, while integrated safety controls prevent high-speed starts and stop mixing when the bridge is lifted. The tilting mechanism uses roller bearings with a case-hardened self-locking worm and segment gear, and the kettle includes a large pouring lip, gallon markings, a 2-inch tangent draw-off valve, and hot and cold water faucet. Standard electrical service is 208-240 volts, 60 Hz, three phase, four wire.
Key Features
- 40-gallon electric steam mixer kettle with tilting design
- 50 psi permanently filled steam jacket with safety valve
- 3 HP hydraulic-powered agitator, scraper, and bridge lift
- Infinitely variable scraper speed from 0 to 40 rpm
- Variable scraper-to-agitator ratio from 1:1 to 8:1
- Removable nylon scraper blades and bayonet-mounted mixing components
- Solid-state temperature control with ±1°F regulation and low-water safety control
- 10-gauge stainless steel hydraulically operated mixer bridge
- Stainless steel kettle, exterior surfaces, and enclosed service components
- Safety controls prevent high-speed starts and stop mixing when the bridge is lifted
- Self-locking worm and segment gear tilting mechanism
- 2-inch tangent draw-off valve, large pouring lip, and gallon markings
- Standard electrical service: 208-240 volts, 60 Hz, three phase, four wire
California residents click here for Prop 65 warning
