Cleveland MKET20T Direct Steam Mixer Kettle, Tilting
The Cleveland MKET20T Direct Steam Mixer Kettle, Tilting is a 20-gallon electric mixer kettle designed for commercial food preparation where controlled heating and consistent mixing are essential. Its 2/3 steam-jacketed design features a permanently filled steam jacket rated at 50 PSI (3.5 Bar), supporting high-speed cooking without requiring routine venting or refilling. Solid-state temperature control provides an operating range of 145°F to 260°F with ±1°F control, while the solid-state low-water safety control helps protect the kettle during operation. A rear-mounted combination pressure/vacuum gauge and pressure relief valve provide convenient pressure monitoring and protection. The kettle and exterior surfaces are stainless steel, with a reinforced rolled rim and large pouring lip for practical commercial use.
The MKET20T provides infinitely variable mixing speeds for different food preparation requirements, with the scraper operating from 0 to 70 RPM and the agitator from 0 to 210 RPM. A 3/4 HP DC timing belt drive powers the mixing system, while bayonet-mounted agitator and scraper assemblies allow convenient removal. Removable nylon blades scrape the jacketed surface, and gallon markings on the scraper shaft support portioning and batch monitoring. Safety features prevent high-speed starts and stop mixing when the bridge is lifted. The enclosed, balanced 10-gauge stainless steel mixer bridge provides a durable mixing platform, while standard electrical service is 208–240 volts, 60 Hz, three phase.
Key Features
- 20-gallon electric mixer kettle with tilting design
- 2/3 steam-jacketed construction with 50 PSI (3.5 Bar) jacket rating
- Solid-state temperature control from 145°F to 260°F with ±1°F control
- Infinitely variable mixing speeds from 0–70 RPM for the scraper and 0–210 RPM for the agitator
- 3/4 HP DC timing belt drive with bayonet-mounted mixing components
- Removable nylon blades scrape the entire jacketed surface
- Solid-state low-water safety control with rear-mounted pressure/vacuum gauge and pressure relief valve
- Stainless steel construction with reinforced rolled rim, large pouring lip, and 10-gauge mixer bridge
California residents click here for Prop 65 warning
