Cleveland KET6T Electric Steam Kettle, Tilting
The Cleveland KET6T Electric Steam Kettle, Tilting is a self-contained table-type kettle designed for commercial foodservice operations requiring high-speed cooking and controlled manual pouring. Its 2/3 steam-jacketed construction features a permanently filled, treated-water jacket rated at 50 PSI (3.5 Bar), providing the steam-jacket capacity specified for faster cooking without routine venting or refilling. The kettle and supports are constructed from Type 304 stainless steel with an #4 finish for a durable, easy-to-clean cooking vessel. A large pouring lip accommodates high-capacity and chunky products, while the reinforced rolled rim helps protect the kettle edge during operation.
The KET6T incorporates splash-proof solid-state temperature and safety controls with less than ±1°C variance and an operating range of 145°F to 260°F (63°C to 127°C). The control panel features an adjustable temperature dial, power switch, and LED indicators for the heat cycle and low-water condition. Solid-state water level control eliminates the need for a sight-glass gauge, while a 50 PSI safety valve and pressure gauge provide steam-jacket monitoring. Its balanced manual tilting design uses a self-locking Marine Lock mechanism to help prevent accidental spills during pouring. Welded-in heating elements and a splash-proof element cover with a double gasket seal complement the kettle's construction. The KET6T operates on 208–240 V, 60 Hz, 3 phase, 3 wire power and weighs 180 lb.
Key Features
- Self-contained table-type electric steam kettle with manual tilting
- 2/3 steam-jacketed construction for high-speed cooking
- 50 PSI (3.5 Bar) steam jacket rating
- Permanently filled treated-water steam jacket
- Type 304 stainless steel kettle and supports with #4 finish
- Splash-proof solid-state temperature and safety controls
- Less than ±1°C temperature variance
- 145°F to 260°F (63°C to 127°C) operating temperature range
- Large pouring lip for high-capacity and chunky products
- Reinforced rolled rim design
- Welded-in heating elements
- 50 PSI safety valve and pressure gauge
- Solid-state water level control
- Splash-proof element cover with double gasket seal
- Self-locking Marine Lock tilting mechanism
- 208–240 V, 60 Hz, 3 phase, 3 wire power input
- 180 lb weight
California residents click here for Prop 65 warning
