Cleveland KEL60 Electric Steam Kettle, Stationary
The Cleveland KEL60 Kettle is a stationary electric steam kettle designed for commercial foodservice operations requiring consistent, high-volume batch cooking. This self-contained, tri-leg mounted kettle provides a 60-gallon (225-liter) capacity with a 2/3 steam-jacketed design rated at 50 psi (3.5 bar). The Type 304 stainless steel kettle and supports feature a #4 finish for durability and easier cleaning in demanding kitchen environments. Its permanently filled steam jacket uses treated water and eliminates the need for routine venting or refilling. A large pouring lip accommodates high-capacity batches and chunky products, while the spring-assisted domed cover provides convenient access. The reinforced rolled rim helps protect the kettle edge during daily commercial use.
The Cleveland KEL60 features splash-proof solid-state temperature and safety controls with less than ±1°C variance for precise temperature management. The plug-in control module includes an adjustable temperature control dial, power switch, heat-cycle LED indicator, and low-water LED indicator. The operating temperature range is 145°–260°F (63°–127°C), supporting a variety of commercial cooking applications. A rear-mounted pressure gauge and 50 psi safety valve provide accessible pressure monitoring, while the solid-state water level control eliminates the need for a sight glass. Welded-in heating elements and a splash-proof element cover with a double gasket seal support the heating system. The 2-inch (50 mm) tangent draw-off valve provides convenient product removal, and the base-mounted design includes three tri-bolt flanges for floor bolting.
Key Features
- 60-gallon (225-liter) capacity
- Stationary, self-contained electric steam kettle
- 2/3 steam-jacketed design rated at 50 psi (3.5 bar)
- Type 304 stainless steel kettle and supports with #4 finish
- Solid-state temperature and safety controls with less than ±1°C variance
- Operating temperature range: 145°–260°F (63°–127°C)
- Spring-assisted domed cover with 1.50-inch freeboard above rated batches
- 2-inch (50 mm) tangent draw-off valve
- Rear-mounted pressure gauge and 50 psi safety valve
- Solid-state water level control
- Splash-proof element cover with double gasket seal
- Standard electrical specification: 208–240 V, 60 Hz, 3 phase, 3 wire
- Power: 14.7 kW
- Dimensions: 34 W x 33 D x 43 H inches
- Shipping weight: 330 lb (150 kg)
- Base-mounted design with three tri-bolt flanges for floor bolting
California residents click here for Prop 65 warning
